Metode six sigma dalam pengendalian kualitas pada home industry tempe
Article Sidebar
Quality Control,
Six Sigma,
DMAIC,
Home industry
Main Article Content
Abstract
Mr. Soyo's home industry tempe is a Small and Medium Enterprise (SME) engaged in the tempe food production industry. In the Mr. Soyo’s home industry temp. has problems in the production process, causing defects in the tempe products produced by 1.5%. The goal of this research is to analyze quality control in the home industry Tempe, as well as the amount-of faults that occur and the underlying variables. The six-sigma approach is used in conjunction with the DMAIC sequence (Define, Measure, Analyze, Improve, Control) to analyze secondary data from a production report from July to September 2021. Quality control in the home industry Tempe was good, according to the analysis of DPMO value (Defect Per Million Opportunity) which was 4,997 and sigma level 4.13, and the magnitude of the problem was within the boundaries of tolerance. Kind defects caused during the production process are broken packaging, imperfect shape and flaccid texture. The cause of the packaging is damaged and the shape is that fermentation rack in open and unclean areas, the causative factor of flaccid texture is that there is no yeast guide and no sign of leaven bought.
Article Details
References
Assauri, S. (2016). Manajemen operasi produksi: pencapaian sasaran organisasi berkelanjutan (Edisi 3). Raja Grafindo Persada.
Besterfield, D. H. (2013). Quality improvement. In angewandte chemie international Edition. Prentice Hall.
Dina, I. F. (2019). Perbaikan kualitas produk kue kering untuk mengurangi defect dengan metode six sigma di home industry “idola rasa.” Jurnal Valtech, 2(2), 61–66.
Gaspersz, V. (2017). The executive guide to implementing lean six sigma strategi dramatis reduksi cacat/kesalahan, biaya, inventori, dan lead time dalam waktu kurang dari 6 bulan! (Edisi 8). Gramedia Pustaka Utama.
Heizer, J., Render, B., & Munson, C. (2014). Operations management: sustainability and supply chain management (12th Ed). Pearson Education, Inc.
Idris, I., Sari, R. A., Wulandari, & U, W. (2016). Pengendalian kualitas tempe dengan metode seven tools. Teknovasi, 3(1), 66–80.
Izzah, N., & Rozi, M. F. (2019). Analisis pengendalian kualitas dengan metode six sigma-dmaic dalam upaya mengurangi kecacatan produk rebana pada Ukm Alfiya Rebana Gresik. Jurnal Ilmiah Soulmath : Jurnal Edukasi Pendidikan Matematika, 7(1), 13–25. https://doi.org/10.25139/smj.v7i1.1234
Rozaq, M. A. (2018). Investasi turnkey project dan dinamika keuntungan dan tantangan untuk perekonomian Indonesia. Jurnal Marketing, 2, 161–167.
Subiyakto, H., Lukmandono, & Prabowo, R. (2017). Analisis peningkatan kualitas produk precast concrete dengan pendekatan statistical process control dan quality function deployment. Seminar Nasional IENACO, 499–506.
Sugiyono. (2013). Metode penelitian kuantitatif, kualitatif, dan R&D. Alfabeta.
Supardi, S., & Dharmanto, A. (2020). Analisis statistical quality control pada pengendalian kualitas produk kuliner ayam geprek di bfc Kota Bekasi. JIMFE (Jurnal Ilmiah Manajemen Fakultas Ekonomi), 6(2), Inpress. https://doi.org/10.34203/jimfe.v6i2.2622
Supardi, S., Jumawan, J., & Andrian, A. (2022). Menentukan kepuasan peserta pelatihan keselamatan pertambangan menggunakan service quality model dan importance performance analysis. 07, 11–23. https://doi.org/https://doi.org/10.24967/ekombis.v7i1.1238
Tannady, H., & Chandra, C. (2016). Analisis pengendalian kualitas dan usulan perbaikan pada proses edging di pt rackindo setara perkasa dengan metode six sigma. Journal of Industrial Engineering & Management Systems, 9(2).
Wilujeng, F. R., & Wijaya, T. (2019). Penerapan metode DMAIC untuk pengendalian kualitas pada ukm tempe semanan. Inovasi Ilmu Pengetahuan, Teknologi Dan Seni Dalam Perencanaan Dan Peran Cangan Lingkungan Terbangun, 266–271.
Yamit, Z. (2018). Manajemen kualitas produk & jasa (Edisi 6). EKONISIA.